Floor (Cargo Area)
(Subscribe)
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
BODY REPLACEMENT AND REPAIR PANELS The perfect-fit, die-formed and shaped body panels ideally repair rusted and dented body sections Heavy-gauge primer-coated steel prohibits rust Easy to install and paint Install easily with screws, by welding or by riveting (welder or rivet gun not included). Finish with epoxy filler (sold separately) and paint.
$52.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
CARGO BED FRONT FLOOR REPAIR PANELS Eliminate the problems of rusted or damaged cargo area Ideal for '73-'92 Chevy/GMC Full-size Blazer/Jimmy Made of primered steel with wheel well cutout and flanges Replaces a sagging cargo area. The integrated panels are made of 19-guage primered steel complete with wheel well cutout and flanges. Approximately 49"W x 25"L.
$92.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
INNER REAR WHEELHOUSE REPAIR PANELS Ideal for Camaros and Firebirds Replaces rusted-out or damaged fenders and panels Improves car's appearance helps restore original look Available for driver's or passenger's side. Heavy-gauge, cold-rolled steel panels are die-formed to fit perfectly! Plain steel finish. Weld-on, rivet-on or screw-on installation (welder or rivet gun not included).
$94.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
INNER REAR WHEELHOUSES Restricts mud and water from entering the body of the vehicle Ideally and economically restore the original look of your vehicle Top-quality die or custom formed panels for complete perfection Be sure to test fit new panel before cutting off old one. Leave some overlap to ensure enough surface space for a good weld. Some surface prep is needed before painting. Plan ahead, take your time problems can occur if you rush the job!
$50.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
OUTER REAR WHEELHOUSE REPAIR PANELS Designed for Camaros and Firebirds Heavy-gauge cold-rolled steel panels perfectly restore the original look Prime coated to prevent rust and simplify painting (some surface prep required) Available for driver's or passenger's side. Heavy-gauge, cold-rolled steel is die-formed to fit perfectly! Weld-on, rivet-on or screw-on installation (welder or rivet gun not included).
$69.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
OUTER SHOCK TOWER Great for restoring structural integrity For '64-1/2 to '66 Ford Mustangs Available for driver's or passenger's side. 14/16-gauge steel. Stamped and formed as original. Mounts between fender and frame. Easy bolt-on installation. Cannot be shipped express.
$34.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
PARTIAL BED FLOOR REPAIR PANELS Repair an extra-large 16"W and 48" L rusted-out or damaged floor area For '64-'95 Pickups, these 20-guage steel panels match flat and ribbed areas of floor Fit easily over corroded or dented area eliminates sagging bed and holes Panels are specially designed to match flat and ribbed areas of floor and fit easily over corroded or dented area. These panels are custom made to replace sections of bed floor. Screw, rivet or weld in place. Will not fit pickups with wheel wells outside bed.
$27.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
REAR CARGO BED FLOOR REPAIR PANELS Integrated panels are designed to repair the rear floor section of your vehicle Ideal for '73-'92 Chevy/GMC Full-size Blazer/Jimmy Made of 19-gauge primered steel Replaces a sagging cargo area. Eliminates problems due to a damaged or rusted-out cargo floor. Complete with wheel well cutouts and flanges. Approximately 38"W x 36"L.
$92.99
(Price
subject to change) |
|
