Ratchets & Extension
(Subscribe)
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
13mm POWERDRIVE™ SLIDING T-SOCKET WRENCH Unlike a standard welded T-handle, the T-handle on this wrench can be slid from the right side to the left side or to the center…anywhere to provide the extra leverage needed Perfect when you need more torque to remove a nut/fastener in a tight spot Polished, precision-forged, heat-treated socket
$37.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
PACKWRENCH™ 3-WAY WRENCH Incorporates 3 of the most-used 6-point socket sizes (8, 10, 12mm) on each tip of the "T" Slightly larger than the palm of your hand, it stores easily anywhere Precision heat-treated sockets are bright chrome-plated At this low price, you can afford 2—one to carry with you everywhere on your bike and one for your garage/shop!
$15.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
90° 1/4" HEX DRIVER KIT Makes conventional 90° screwdrivers obsolete! Gets into hard-to-reach areas and pilots air screws on in-line fours Gear-driven 1/4" hex drive Versatile—can be used with any 1/4" or 6mm hex bits. Maximum 50 in./lb. torque rating—the strongest on the market! Precision made of aircraft-grade aluminum and stainless steel. Includes five 1/4" hex drive bits (straight slotted, Phillips, D-shaped pilot for Honda carbs, 6mm hex jet and 1/4"-hex-to-1/4"-drive). Approximately 17-5/8" long. Limited one-year warranty.
$85.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
L-Handles
( Added: Mon Apr 16 2007 )
|
L-HANDLES Use to tighten/loosen fasteners Use the shaft side for hard to reach fasteners Use the handle drive for more torque Compact—only 9-7/8" long. Impact resistant handle is designed to minimize hand fatigue. One-piece chrome vanadium tool steel shaft. Use with your drive sockets, hex drives, crow's foot wrenches, etc. Tough nickel pewter finish. Manufacturer's lifetime replacement warranty.
$12.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
MINISET™ COMPACT TOOL KITS These polished chrome-plated top-grade tools come with a limited lifetime warranty! Double-wall blow-molded polyethylene carrying case can survive the rigors of the road Select the SAE set (great for Harley V-twins), or the metric set (best for metric bikes)
$37.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
POWERDRIVE™ SLIDING T-HANDLE/SOCKET SET A much more efficient alternative to fixed-socket T-handles—the sliding "T" provides the extra torque when it's needed Professional quality-chrome-plated heat-treated chrome-vanadium steel Includes: sliding T-handle with standard 3/8" drive tip, 5 sockets (8, 10, 12, 14 and 17mm), 2 hex bits (5mm and 6mm) and a #2 Phillips bit. Clip holds the sockets in place and attaches to T-handle. All tools fit in a rugged vinyl storage pouch.
$25.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
RACER T-HANDLE SOCKET SET Allows nuts to be driven over long threaded bolts Hex sockets prevent nut from being pushed too far into socket Thin outside diameter allows sockets to fit into tight spots Made to last—chrome vanadium tool steel shaft and carbon steel handle. Includes 6-point deep sockets (8, 10, 12 and 14mm) plus #2 and #3 Philips screwdrivers. Durable nickel pewter finish. Limited lifetime warranty on sockets. Includes vinyl storage pouch. Organizer Rack sold separately (item # ZX274569).
$46.99
(Price
subject to change) |
|
