Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
1-PC. WRAPAROUND SADDLEBAG RAIL KIT Dual rail consists of a 1" diam. full wraparound upper rail and a 5/8" diam. lower rail that extends halfway up the sides of the upper rail Replaces original stock chrome bag guards. No drilling or modifications. Custom fit for all GL1500 Gold Wing® models with original saddlebags. Heavy-gauge steel. Includes hardware and instructions.
$184.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
CHROME-PLATED SADDLEBAG RACKS Extra storage space, extra styling and protection for saddlebag tops Racks incorporate 4 strong 1/2" diam. steel rails For '96-99 Honda Valkyrie GL1500 Approx. 6"W (tapering to 5" at front) x 10-3/4"L. Mount to original-equipment hard saddlebags and sit 1/2" above tops. Secure, vibration-resistant 4-point attachment with hardware included. Drilling of saddlebag tops required.
$79.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
CHROME-PLATED SADDLEBAG SUPPORT BRACKETS Rugged 5/16" diameter brackets support and protect your throw-over saddlebags Custom-designed to fit perfectly—welded-on/predrilled tabs allow easy installation to rear fender supports Heavy-duty steel with triple chrome plating No drilling, cutting or welding required. Hardware and instructions included. Sold in pairs. If you will also be installing either of the MC Enterprises Sissy Bars (sold separately; SKU# 01ZX5766P or 01ZX5767Y), you will need to order the Additional Hardware Kit (sold separately; SKU# 05ZX5838X).
$74.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
CHROME-PLATED SADDLEBAG SUPPORT STAYS Chromed 3/8" diameter steel stays look great…help keep saddlebags away from tire, swing arm and brake caliper Custom-fit stays mount easily to rear fender support bracket at existing points without drilling Will not fit Standard models. Chrome-plated hardware and instructions included. Sold in pairs.
$54.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
CHROME-PLATED SADDLEBAG SUPPORTS Custom-fit/styled supports help keep throw-over saddlebags away from rear wheel, tire, swing arm and brake caliper Easy to mount—no drilling, cutting or welding required Help maintain clearance between saddlebag and rear wheel to protect both bike and saddlebag from damage Chromed 3/8" diameter steel supports are designed specifically for your bike. Welded-on and predrilled tabs allow easy installation to rear fender struts and/or rear turn signal mounts. Necessary hardware and instructions included. Sold in pairs. NOTE: This is a custom-fit item. The image shown is a representation of this item for a specific year, make and model. The item you receive may look somewhat different in order to accommodate your specific motorcycle.
$49.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
CHROME-PLATED SADDLEBAG SUPPORT BRACKETS Prevent bag damage! Chromed brackets help maintain clearance between the rear wheel and your throw-over style saddlebags Completely adjustable—position brackets right where you want them for best placement of saddlebags! 1/2" diameter tubular steel supports have welded-on mounting tabs that attach into the chromed steel slide-tracks One of the most convenient saddlebag support systems! Slide-tracks attach to your fender struts and let you adjust the support brackets and saddlebags forward or back until you determine their best position. Then, you simply secure the brackets within the slide-tracks. Saddlebags not needed? You can easily remove and store the brackets until next time—no need to leave them on all the time. Slide-tracks remain on the bike. Hardware and instructions included. Sold in pairs.
$79.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
CUSTOM-FIT CHROMED-PLATED SADDLEBAG SUPPORT BRACKETS Support your throw-over saddlebags and keep them safely away from wheel, swing arm & brake caliper Chromed custom-formed 3/8" diam. round steel brackets mount to original rear fender at existing points— no drilling required Hardware included. An extra set of longer bolts is also included to let you attach these support brackets and additional brackets for other accessories (sissy bars for example) at the same mounting points. Sold in pairs only.
$43.99
(Price
subject to change) |
|
