Motorcycle Battery Chargers
(Subscribe)
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
1/2-AMP MOTORCYCLE BATTERY CHARGERS Small 2" x 2-1/2" x 1-1/2" module stores under seat Available with permanently attachable leads or alligator clips, 12-volts or 6-volts Chargers allow recharging or trickle charging without removing battery Plugs into any 110- to 120-volt outlet. 6-ft. quick connect/disconnect cable included. UL listed.
$16.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
12V 1.5A BATTERY CHARGERS Fully automatic 5-stage charge cycle for efficient charging Designed to prevent overcharging Charging and float mode LED display Reverse polarity protection Accessory leads and fused ring connectors included 3-year manufacturer's warranty
$63.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
4-BANK INTERNATIONAL BATTERY CHARGER Four encased 1.25 amp battery chargers designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers This charger will operate anywhere in the world! 4 independent charging stations with 12 volts at 1.25 amps per station Extremely lightweight! Less than 3 lbs! 100-240 VAC 50/60 Hz. Microprocessor controlled constant current charging! Charger is also reverse polarity protected and spark proof. Perfect for all AGM (absorbed glass matte), sealed maintenance free and flooded batteries. Will comply to all International safety standards (UL/CSA/CE). Optional 25-ft. extension cable sold separately. Comes with manufacturer's 2-year warranty.
$259.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
5 OR 10 BANK BATTERY CHARGERS Safe, no spark charging! Light years ahead of any standard battery charger—the first fully automatic, constant-current battery charger designed to charge and/or maintain multiple 12-volt batteries simultaneously at 2 amps 2 amps per output charging current To avoid dangerous dead-short sparking, microchip circuitry will not activate output voltage until clips are correctly connected to battery. Maintains batteries at full charge. Six foot lead with clamps included. Comes with manufacturer's 3-year warranty.
$699.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
AUTOMATIC BATTERY CHARGERS - 1.5A Microprocessor technology safely maintains and charges batteries Automatically charge batteries with three stages Optimal charging voltage adjusts automatically for changes in ambient temperature Safety shut-off for reverse polarity and short-circuit protection Input: 120V AC, 60Hz Output: 12V DC at 1.5A Maximum charge: 14.8V at 77°F (25°C) Maintenance charge: 13.8V at 77°F (25°C) Alligator clips and quick connect rings included 2-year warranty
$55.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
AUTOMATIC BATTERY CHARGERS - 900MA Small, wall mounted chargers in a plastic case Microprocessor technology safely maintains and charges batteries Automatically charge batteries with three stages Safety shut-off for reverse polarity and short-circuit protection Input: 120V AC, 60Hz Output: 12V DC at 900mA Maximum charge: 14.8V Maintenance charge: 13.8V Alligator clips and quick connect rings included 2-year warranty
$27.99
(Price
subject to change) |
|
