Cat-Back Single Outlet Exhaust Systems
(Subscribe)
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
BIG 3" SINGLE CAT-BACK EXHAUST SYSTEM Aluminized mandrel-bent 16-gauge tubing Easy to install using common hand tools Big 3" diameter. Free-flow welded aluminized muffler with 3" cores to minimize back pressure. 3-1/2" polished stainless steel exhaust tip. Kit includes muffler, all exhaust tubing from behind the catalytic converter plus all necessary hardware.
$262.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
HIGH-PERFORMANCE CAT-BACK SINGLE EXHAUST SYSTEM KITS Designed and engineered to fit perfectly Rust proof T-304 aircraft-grade stainless steel is welded for strength and long service Maximum airflow for increased exhaust output and fuel economy, and an exhilarating drive Delivers that unmistakable Borla sound, aggressive yet pleasant Mandrel-bent tubing is less restrictive than original-equipment system for more power, faster acceleration and better fuel economy. Produces 10 to 12 more horsepower. Bright angle-cut tip with rolled edges. Phantom "pipe-in-pipe" tip design. Exhaust exits at rear. Backed by Borla's 1,000,000-mile warranty. Kit includes all pipes from the catalytic converter back plus muffler and all hangers, clamps and hardware for easy bolt-on installation.
$1324.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
HIGH-PERFORMANCE MUFFLER-BACK 3" SINGLE EXHAUST SYSTEMS Maximum power plus a deep, throaty tone in one street-legal system System includes high-flow turbo muffler, 3" diameter pipe Heavy-gauge steel components are aluminized for maximum corrosion resistance and longer service life. All necessary clamps, hangers, hardware and instructions included.
$189.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
HEARTTHROB HIGH-PERFORMANCE SINGLE CAT-BACK EXHAUST SYSTEMS Replaces the restrictive factory exhaust Get the full potential from your big 6-or 8-cylinder engine Reduces backpressure for more horsepower and more torque One incredible system at a great low price! Heavy-gauge steel, aluminized for corrosion resistance and longer service life. Huge 3-inch diameter pipes and muffler core except for Chevy Blazer and Jimmy, Jeep Cherokee and Liberty, which have 2.5-inch diameter pipes. Mandrel-bent pipes for unrestricted flow. Kit includes high-flow turbo muffler, clamps, hangers and all necessary hardware. Cutting of connector pipe on short wheelbase pickups maybe required.
$285.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
HEARTTHROB HIGH-PERFORMANCE STREET AND TRACK CAT-BACK EXHAUST SYSTEMS WITH CUTOUT Cutout cap wing nuts for fast and easy removal High-flow turbo muffler and mandrel-bent 3" diameter pipes dramatically reduce backpressure for better street performance Heavy-gauge steel, aluminized for corrosion resistance and long service life Muffler and pipes replace your restrictive factory exhaust. Kit includes pipes, mufflers, cutout, clamps and all hardware after catalytic converter and instructions. Cutout installs between converter and muffler — you determine the location and then cutout to safely expel exhaust. Note: Cutout can only be uncapped on race track or area not converted by noise-restriction laws.
$232.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
INSTALLER SERIES ALUMINIZED SINGLE CAT BACK DIESEL EXHAUST SYSTEM Every component fits as expected! The lowest bend degree angles and smooth mandrel bends mean that exhaust gases have an easier path to the tip, moving faster and reducing exhaust gas temperatures—allows your truck to maintain optimal operating temperatures under high performance conditions, resulting in fuel efficiency, more torque and more horsepower System is suitable for areas with moderate environmental conditions Designed and built to stand up to the harshest road conditions! 4" mandrel bent tubing and will give you the greatest sound possible! Bolts directly on. Includes all pipes, mufflers, hangers and hardware. Made of 100% heavy-gauge aluminized steel so it's rugged and dependable! Comes with manufacturer's 1-year warranty. Tips sold separately.
$410.9
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
INSTALLER SERIES ALUMINIZED SINGLE CAT BACK DIESEL EXHAUST SYSTEM Every component fits as expected! The lowest bend degree angles and smooth mandrel bends mean that exhaust gases have an easier path to the tip, moving faster and reducing exhaust gas temperatures—allows your truck to maintain optimal operating temperatures under high performance conditions, resulting in fuel efficiency, more torque and more horsepower System is suitable for areas with moderate environmental conditions Designed and built to stand up to the harshest road conditions! 4" mandrel bent tubing and will give you the greatest sound possible! Bolts directly on. Includes all pipes, mufflers, hangers and hardware. Made of 100% heavy-gauge aluminized steel so it's rugged and dependable! Comes with manufacturer's 1-year warranty. Tips sold separately.
$410.9
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
POLISHED STAINLESS STEEL CAT-BACK PERFORMANCE SINGLE EXHAUST SYSTEMS Completely made of top-grade T-304 stainless steel for durability (not cheaper 400 series which can rust) Entire exhaust system is polished, not just the muffler or tips Easy bolt on installation using OE attaching points High flow design increases power and torque and works effectively with other engine modifications. Outperforms every street-legal system. All systems conform to California sound laws. NOTE: Systems with 3" diameter tubes are for cars with turbocharger, they will not connect to a stock catalytic converter. Extra 3" flange is included to help with modifications required to connect to a high flow catalytic converter.
$919.99
(Price
subject to change) |
|
