Trailer Brake Controls & Wiring Harness
(Subscribe)
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
BREAK-AWAY KITS 1 to 3 axle capacity Legally required in most states and Canada Built-in battery charger — charges battery while plugged into vehicle Mounts to trailer with a cable mechanism. These kits are also known to minimise the possibility of accidents. If the trailer becomes disconnected from towing vehicle, the cable mechanism pulls a connector pin from the break-away system engaging the electric breaks and safely slowing and eventually stopping the trailer. 5 amp hour battery; built-in battery meter with LED test lights indicate Fully charged/Re-charge/Charging; convenient test button verifies battery charge. Kit includes Break-away system, battery, battery charger and cable and pin mechanism.
$39.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
ELECTRONIC BRAKE CONTROLS Manual touch pad helps prevent swaying and jackknifing Provides precise adjustment of braking over a wide range of light to heavy loads Designed for camping, horse, boat and other commercial or fifth wheel trailers with electric brakes with gross weight up to 18,000 lbs. and 1, 2 or 3 axles. Installs easily under dash — only 4 wires required to hook up. 2 optional wires are included for features unique to this control: (1) automatic disconnect when vehicle is put in reverse and (2) soft illumination of manual control pad (makes it easier to locate at night). LED indicates that brakes are working properly. Solid state. 5-3/4"W x 1-5/8"H x 5-1/2"D. Includes bracket, instructions and connections. For all 12-volt negative-ground systems. Limited 3-year warranty.
$79.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
PLUG-IN BRAKE CONTROL WIRING ADAPTERS For American trucks and SUVs Connects any brake control to vehicle's OEM wiring harness for reduced installation time No splicing, no cutting Coupler end on adapter plugs into the coupler built into vehicle's under-dash wiring harness.
$11.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
SOLID-STATE ELECTRIC BRAKE CONTROLS Ensures automatic, smooth, synchronized stopping of trailer with tow vehicle Ideal for camping, horse, boat and other commercial or fifth wheel trailers with electric brakes and 1 to 4 axles Precise braking adjustments over a wide range of light to heavy loads Compact for easy installation. Mounting brackets, wiring instructions and connections included. 12-volt negative ground.
$109.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
TOWING BRAKE CONTROLLER A fraction of a second counts when you're towing and this unit is one of the fastest…and safest! Microprocessor chip combined with the advanced smart algorithm software produce a response time of 0.03 seconds—80 times faster than most controllers sold today! Two LEDs make this unit one of the easiest to use! Red LED flashes when an error is detected (error code on the LCD screen lets you know what's malfunctioning). When the red light stays on, all systems have been checked and are ready to go. The blue LED comes on when you apply the brakes (preset percentage will be shown on the screen). You won't need it, but this controller is powerful enough to handle up to 16 braking systems without getting hot.
$64.99
(Price
subject to change) |
|
