Welders & Accessories
(Subscribe)
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
CLARKE™ 110-VOLT (30-130 AMP) PORTABLE GASLESS WIRE MIG WELDER Welds up to 3/16" thick steel Built-in professional features yet easy to use and affordable! Complete! Just plug it in and you're ready to weld! No gas cylinder or regulator 30% duty cycl
$389.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
CLARKE® 20- to 95-AMP ARC WELDER Welds mild steel up to 3/16" thick 30% to 100% duty cycle for longer continuous welding Operates on 110-V circuit, use with 1/16 thru 5/64 electrodes. Infinitely-adjustable amperage range allows precise control of the heat setting Heavy-duty components (transformers, resistors, etc.) maximize operating efficiency Moisture-proof impregnated insulation. Built-in cutout prevents thermal overload. Leads are detachable for easy servicing, handling, and storage. Each unit is individually tested and operates on 20-amp AC single-phase circuit with approx. 5-1/2 ft. ground cable, 8-ft. electrode cable. Open circuit voltage: 48 volts. Convection-cooled transformer. Comes with hand-held face shield, electrode holder and work clamps with cables, wire brush, chipping hammer and operating instructions. Weighs approx. 29 lbs.
$114.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
CLARKE® 40-to 100-AMP ARC WELDER Welds mild steel up to 1/4" thick 30% to 100% duty cycle for longer continuous welding Operates on 110-V circuit, use with 1/16 thru 3/32 electrodes. Infinitely-adjustable amperage range allows precise control of the heat setting Heavy-duty components (transformers, resistors, etc.) maximize operating efficiency Moisture-proof impregnated insulation. Built-in cutout prevents thermal overload. Leads are detachable for easy servicing, handling, and storage. Each unit is individually tested and operates on 20-amp AC single-phase circuit with approx. 5-1/2 ft. ground cable, 8-ft. electrode cable. Open circuit voltage: 48 volts. Convection-cooled transformer. Comes with hand-held face shield, electrode holder and work clamps with cables, wire brush, chipping hammer and operating instructions. Weighs approx. 32 lbs.
$149.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
Mig Welder
( Added: Mon Apr 16 2007 )
|
PORTABLE MIG WELDER Professional-type non-live torch with current/gas trigger for maximum control and safety, gas and electrical economy. 6 power settings to fine-tune for different metals, gauges of metal and gases. Refillable cylinder, welding wires, no
$399.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
PORTABLE GAS WELDING OUTFIT WITH TANKS AND CART Welds steel up to 1/2" thick, cuts steel to 1/2" thick Includes tanks and cart Includes: 20-cu. ft. capacity oxygen tank; 10-cu. ft. capacity MC acetylene tank; single-stage, rear-entry oxygen and acetylene regulators for smooth gas flow; small, medium and large tips to weld up to 1/2"; medium cutting tip; cart with storage area for components. Note: Both tanks are empty.
$314.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
PORTABLE HEAVY-DUTY GAS WELDING KIT Welds steel up to 1/2" thick, cuts steel to 1/2" thick Tank/cart set available separately Includes: Single-stage, rear-entry oxygen and acetylene regulators for smooth gas flow; small, medium and large tips to weld up to 1/2"; medium cutting tip. Tank/cart set not included (sold separately).
$165.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
REFILLABLE ARGON/CO2 CYLINDER For use with portable MIG welder. Accepts argon/CO2 for welding with mild steel or stainless steel welding wire, or pure argon for welding with aluminum welding wire. 20-cu. ft. capacity. Gas not included; check local availability of gases before ordering.
$87.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
SPOT WELDER
( Added: Mon Apr 16 2007 )
|
SPOT WELDER Works with any electric arc welder with settings of 50 amps or less The method used by auto manufacturers for building vehicles. Confines heat and prevents distortion. Allows welding from one side of metal. Ideal for working in hard-to-reach areas. Trigger release gun is ergonomically designed to prevent hand fatigue. Welds light (18- to 26-gauge mild steel) sheet metal panels together. Kit includes 4-prong head for flat surfaces, 2-prong head for rounded/curved surfaces, approx. 4-1/2 ft. power cord (attaches to arc welder), 2 special electrodes and complete instructions. Package of 10 electrodes available separately (SKU# 811591R).
$59.99
(Price
subject to change) |
|
