Skip to Content

Home
Home > Tools & Manuals > Specialty Automotive Tools > Air Conditioning Tools

Air Conditioning Tools (Subscribe)

> >|

Report Link Rate It Review It Send To Friend! Bookmark It **FREE Tool Bar**

A/C System Peformance Calculator
( Added: Mon Apr 16 2007 )

A/C SYSTEM PERFORMANCE CALCULATOR Instant performance test under any ambient temperature condition Fahrenheit and Celsius scales Includes ambient and vent temperature probes Suspends from hood latch or attaches to your manifold gauge set. Diagnostic flow chart and tech tips to guide you through the test. Auto shut off. JC Whitney 60-day warranty.
$46.99 (Price subject to change)

Report Link Rate It Review It Send To Friend! Bookmark It **FREE Tool Bar**

ALL-IN-ONE SPRING LOCK COUPLING TOOL
( Added: Mon Apr 16 2007 )

ALL-IN-ONE TOOL For air conditioning, fuel, radiator and transmission lines. Disconnect the spring-lock couplings on Chrysler and Ford air conditioning lines. Also work on quick-connect fuel line couplings on Chrysler, Ford and GM vehicles. 5/16" size disconnects push-lock connectors on Ford radiators and transmission lines. The all-in-one tool releases the locking mechanism on 3/4", 5/8", 1/2" and 3/8" couplers quickly, easily and safely.
$7.99 (Price subject to change)

Report Link Rate It Review It Send To Friend! Bookmark It **FREE Tool Bar**

CLUTCH HOLDING TOOL
( Added: Mon Apr 16 2007 )

CLUTCH HOLDING TOOL Prevents clutch plate from turning when shaft nut is removed Adjusts to fit GM, Ford, Chrysler and Volkswagen compressors Saves on shop costs
$22.99 (Price subject to change)

Report Link Rate It Review It Send To Friend! Bookmark It **FREE Tool Bar**

CLUTCH PLATE HUB REMOVAL & INSTALLATION KIT
( Added: Mon Apr 16 2007 )

CLUTCH PLATE HUB REMOVAL/INSTALLATION KIT For air conditioner compressors A Classic Tool Design, Inc. tool. Kit includes puller disk with tapped holes, 3 puller bolts, 3 removal nuts, 4 removal adapters, 3 replacement adapters, master arbor for use with all adapters and thrust bearing. For use with the following compressors: Bosch; Chrysler C171; Diesel Kiki; Ford FS6, 6P148, HR980; General Motors A6, R4, DA6, V5; Mitsubishi; Nippondenso; Sanden.
$65.99 (Price subject to change)

Report Link Rate It Review It Send To Friend! Bookmark It **FREE Tool Bar**

CLUTCH PLATE INSTALLER
( Added: Mon Apr 16 2007 )

CLUTCH PLATE INSTALLER Top-quality tool for the job Saves on shop costs For all Delco and Frigidaire compressors
$12.99 (Price subject to change)

Report Link Rate It Review It Send To Friend! Bookmark It **FREE Tool Bar**

CLUTCH PLATE REMOVER
( Added: Mon Apr 16 2007 )

CLUTCH PLATE REMOVER Top-quality tool for the job Saves on shop costs For General Motors, AC-Delco, Frigidaire and Harrison compressors Helps remove clutch without removing retainer ring.
$9.99 (Price subject to change)

Report Link Rate It Review It Send To Friend! Bookmark It **FREE Tool Bar**

COMPRESSOR OIL INJECTOR
( Added: Mon Apr 16 2007 )

COMPRESSOR OIL INJECTOR Top-quality tool for the job Faster than other methods…no disassembly required Saves on shop costs With gauge manifold assembly or charging station (not included), uses the pressure differential from the high to the low side of the system to inject up to 2 oz. of oil into compressor. No refrigerant charge is wasted.
$32.99 (Price subject to change)

Report Link Rate It Review It Send To Friend! Bookmark It **FREE Tool Bar**

CONDENSER EVAPORATOR FIN COMB
( Added: Mon Apr 16 2007 )

CONDENSER/EVAPORATOR FIN COMB Saves on shop costs Keeps fins free of dirt to ensure smoother, more efficient operation For coil fins spaced 8, 9, 10, 12, 14 and 15 fins per inch
$13.99 (Price subject to change)
> >|