Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
ADJUSTABLE PUSHROD Pushrod length is critical especially with a non-roller tipped rocker. Length should be established using an adjustable pushrod so the sweep pattern over the valve tip is as shown to minimize valve stem side loading. Can create a more optimal valve motion, which can give additional output. Sold as each.
$8.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
CARBURETOR SYNCHRONIZER Direct-reading. Dial-type For all multiple carburetor setups Balances all side-draft, down-draft or up-draft carbs at both idle and running speeds. Fits all single, dual or 4-bbl. carbs. Universal adapter fits diam. from 1-9/16" to 2-7/8". Easy-to-read calibrated dial. Provides immediate indication that carburetors are "equal"—no readjusting instrument needed. Large intake aperture prevents floating, assures exact synchronizing at lowest idling speeds and at increased RPMs. Does not slow speed of engine during tests.
$29.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
COIL-ON PLUG TUNE-UP KIT An easy, affordable way to tune "coil on plug" vehicles! OE-style boots and springs attach the coil to the spark plug A cost-saving alternative to buying the complete coil assembly just for the boots and springs! Kit includes boots and springs equivalent to the number of cylinders in your vehicle. Limited one-year warranty.
$59.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
CYLINDER GAUGE 1-3/4" to 3-1/4" range Preset “zero” reading so that it is at exact original diameter of the cylinder to be worked. Any dial reading above zero will indicate in thousandths of an inch the exact amount of wear on cylinder walls. Includes instructions.
$64.99
(Price
subject to change) |
|
