Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
2-ARM HEAVY-DUTY 4-PIECE GEAR PULLER SET Includes: 3", 4", 6" and 8" pullers Grip tightly…won't slip. Pull gears, sprockets, bearings and pulleys effortlessly and safely. Polished jaws and arms are forged and machined from quality alloy steel, precision heat treated for maximum durability and strength. Hardened steel center bolt with hex head for sure-grip wrench fit. Jaws can be reversed to grip firmly inside or outside gears or parts. Sets includes these pullers: 3" (approx. 2-1/2" reach), 4" (approx. 3-1/2" reach), 6" (approx. 4-3/4" reach) and 8" (approx. 7-1/2" reach). 4" through 8" pullers have lower centering cap on bottom of bolt to assure constant, even pressure. 8" puller has 2-hole adjustable jaws.
$29.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
2-ARM HEAVY-DUTY GEAR PULLERS Available in 5 sizes: 3", 4", 6", 8" and 12" Grip tightly?won't slip. Pull gears, sprockets, bearings and pulleys effortlessly and safely. Polished jaws and arms are forged and machined from quality alloy steel, precision heat treated for maximum durability and strength. Hardened steel center bolt with hex head for sure-grip wrench fit. Jaws can be reversed to grip firmly inside or outside gears or parts.
$44.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
3-ARM HEAVY-DUTY 4-PIECE GEAR PULLER SET Includes: 3", 4", 6" and 8" pullers Grip tightly…won't slip. Pull gears, sprockets, bearings and pulleys effortlessly and safely. Polished jaws and arms are forged and machined from quality alloy steel, precision heat treated for maximum durability and strength. Hardened steel center bolt with hex head for sure-grip wrench fit. Jaws can be reversed to grip firmly inside or outside gears or parts. Sets includes these pullers: 3" (approx. 2-1/2" reach), 4" (approx. 3-1/2" reach), 6" (approx. 4-3/4" reach) and 8" (approx. 7-1/2" reach). 4" through 8" pullers have lower centering cap on bottom of bolt to assure constant, even pressure. 8" puller has 2-hole adjustable jaws.
$32.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
3-ARM HEAVY-DUTY GEAR PULLERS Available in 5 sizes: 3", 4", 6", 8" and 12" Grip tightly…won't slip. Pull gears, sprockets, bearings and pulleys effortlessly and safely. Polished jaws and arms are forged and machined from quality alloy steel, precision heat treated for maximum durability and strength. Hardened steel center bolt with hex head for sure-grip wrench fit. Jaws can be reversed to grip firmly inside or outside gears or parts.
$59.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
5-TON BAR-TYPE PULLER/BEARING SEPARATOR SET Separator tools used with bar puller and legs for a wide variety of pulling jobs Housed in a blow-molded plastic storage case JC Whitney 60-day warranty Set includes 2 bearing "splitters" (2" and 3"), 4 sets of hex push-puller legs and a bar-type puller head with a 9/16" forcing screw; 5" puller cross-bar with a 6-1/4" forcing screw. Each of the bearing separators may be used separately or in combination with other pullers or tools. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
$83.99
(Price
subject to change) |
|
Report
Link
Rate It
Review It
Send To Friend!
Bookmark It
**FREE Tool Bar**
|
|
|
BEARING SEPARATOR/PULLER AND GEAR PULLER SET Five separate service tools in one set. This versatile set includes all the components necessary to make the following tools: steering wheel puller, gear puller, bearing separator, bearing puller, timing gear puller and more. Ideal for removing generator parts and bearing cones. Can be used to pull sprockets and pulleys with tapped hole sizes 5/16"-18, 3/8"-16, 3/8"-24 or 8 x 1.25mm. Bearing puller/separator (made of heat-treated alloy steel) uses a wedging action to separate bearings from other parts?has 1/2" to 3-1/4" range. Gear puller arms (made of drop-forged, heat-treated alloy steel) have spread of approx. 5-3/4" and a reach of 4". Hardened steel center bolt. With storage box.
$47.99
(Price
subject to change) |
|
